Clinical Chemistry Reagents · Electrolytes

Calcium O-CPC

Diagnostic reagent for the in-vitro quantitative determination of Calcium in human serum, plasma and urine on manual systems.

RangeClinical Chemistry Reagents — Electrolytes
MethodEnd-point
Type of specimenSerum, plasma and urine. Use non-haemolysed serum; fresh serum collected in the fasting state is the preferred specimen. Heparin is the only acceptable anticoagulant; no other anticoagulant can be used, and complexing anticoagulants such as citrate, oxalate and EDTA must be avoided. Serum or plasma should be separated from the cells as soon as possible, because prolonged contact with the clot may cause lower calcium values. Sera from patients receiving EDTA (treatment of hypercalcemia) are unsuitable for analysis. Serum stable 7 days at 15–25 °C, 3 weeks at 4–8 °C, 8 months at –20 °C. Stored serum or urine specimens must be mixed well prior to analysis.
Urine specimenSpecimens should be collected in acid-washed bottles; 24-hour specimens should be collected in containers containing 5 ml of 6 mol/L HCl; if the specimen is collected without acid, the pH should be adjusted to below 3 with 6 mol/L HCl. Dilute the urine specimen with distilled water (1 volume urine + 1 volume distilled water) before the assay. Stable 2 days at 15–25 °C, 4 days at 4–8 °C, 3 weeks at –20 °C.
StorageReady to use. Stable until the expiry date on the label at 2–8 °C. Do not use if turbid.
Catalogue numbers4

Ordering information

Cat. No. (REF) Tests / kit Quote
BS.1/CA02.025.0050 50 tests Quote
BS.1/CA02.050.0100 100 tests Quote
BS.1/CA04.025.0100 100 tests Quote
BS.1/CA02.100.0200 200 tests Quote
More in this range

Electrolytes

View the full range
IFUMSDS

Chloride – Single Reagent

Diagnostic reagent for the in-vitro quantitative determination of Chloride in human serum, plasma…

  • 4 catalogue numbers
  • End-point
View product
IFUMSDS

Copper Fluid Auto

Diagnostic Single reagent for the in-vitro quantitative determination of copper in human serum…

  • 3 catalogue numbers
  • End-point
View product
IFUMSDS

Lithium (porphyrin-like colorimetric method)

This kit is used for in vitro quantitative determination of lithium content in human serum.

  • 1 catalogue number
  • Endpoint
View product
IFUMSDS

Total Iron Chromazurol B – Single Reagent

Diagnostic reagent for the in-vitro quantitative determination of total iron in human serum and…

  • 3 catalogue numbers
  • End-point
View product
IFUMSDS

Magnesium – Single Reagent

Diagnostic reagent for the in-vitro quantitative determination of Magnesium in human serum, plasma…

  • 4 catalogue numbers
  • End-point
View product
IFUMSDS

Phosphorus – Single Reagent

Diagnostic reagent for the in-vitro quantitative determination of Phosphorus in human serum, plasma…

  • 4 catalogue numbers
  • End-point
View product
IFUMSDS

Potassium – Single Reagent

Diagnostic reagent for the in-vitro quantitative determination of potassium in human serum and…

  • 4 catalogue numbers
  • End-point
View product
IFUMSDS

Sodium – Single Reagent

Diagnostic reagent for the in-vitro quantitative determination of Sodium in human serum, plasma, CSF…

  • 4 catalogue numbers
  • End-point
View product
IFUMSDS

Total Iron Binding Capacity (TIBC)

Diagnostic reagent for the in-vitro quantitative determination of total iron binding capacity in…

  • 3 catalogue numbers
  • End-point
View product
IFUMSDS

Zinc – (Single Reagent)

Diagnostic reagent for the in-vitro quantitative determination of Zinc in human serum, plasma and…

  • 2 catalogue numbers
  • End-point
View product

Let’s equip your laboratory.

Tell us what your laboratory needs — our team will get back to you with product information, availability and a quotation.

Chat with technical supportChat with local salesChat with exportEmail us